GT35 Turbocharger .82 A/R 56 Trim. Billet aluminum compressor backing plate. Anti-surge compressor housing. Good for several higher HP 4/6 cylinder applications. Honda Civic, Nissan S13, S14, 240SX, Mitsubishi Eclipse, Mustang etc. It can produce up to 600 HP depending on your combination. Journal bearing. See full specifications under "Technical Specs". 6 month warranty. Note: Turbochargers are non-returnable.

• Horsepower Level = 500-600HP 6-25psi
  Turbo Style = GT3582
  Compressor A/R = .70
  Compressor Inducer Diameter = 61.40mm
  Compressor Exducer Diameter = 82mm
  Compressor Trim = 56
  Exhaust Inducer Diameter = 68mm
  Exhaust Exducer Diameter = 62.30mm
  Exhaust Trim = 84
  Compressor Inlet OD = 4"
  Compressor Outlet OD = 2.50"
  Turbine Inlet Flange Style = T3 (Vibrant #1400 or #14000)
  Turbine Outlet Flange Style = 4-bolt PW#427235 or 4-Bolt to 3" V-Band Exhaust Flange PW#427135
  Turbine A/R = .82
  Cooling = Water/Oil
  Oil Feed Threads = 7/16"x24 Inverted Flare
  Water Cooling Threads = M14x1.50
  Oil Drain Bolt Threads/Spacing = M8x1.25/38mm
  Typical installation precautions and guidelines can be found HERE. Experiencing an oil leak? Troubleshoot that HERE.

Turbine Inlet Flange Gasket = PW #427030
Turbine Outlet Flange Gasket = Vibrant #1438G