View, download or print our BRAND NEW Volume 21 Catalog & New Product Supplement below!
Print version available NOW! FREE with every shipment!

Volume 21 Supplement Date 03/05/2021
2021 Catalog Corrections & Addendums Page 37 - 96410 & 96410A have been discontinued and are limited to stock on hand. Page 41-42 - The LS1/LS2/LS6 manifolds have a .540" injector bung. The LS3 manifolds have a .560" injector bung. Page 56 - The oil feed restrictor (if required) is a PW #9200433R (Not shown on page 66 as stated) Page 80 - The 69255R has been discontinued and is no longer available. Page 96 - 368160 and 368180 have been discontinued and is no longer available. Page 118 - The ceramic boot ignition wires should have a note "Do not fit spark plugs with a 13/16" hex" Page 162 - 720040BK has been discontinued and is no longer available. Page 189 - The 329091DBW has been replaced by 329056 (A/T) and 329057 (M/T). Page 190 - 329021 should read OVR flame retardant automotive copper strand wire, rated -20°C to 105°C
Download the 2020 Catalog HERE Download the Last 2020 Supplement HERE 2020 Catalog Corrections Page 18 - 84011010 has been discontinued and is no longer available. Page 25 - 545376 and 545501 have been discontinued and are no longer available. Page 30 - 9640810 has been superseded by 9640810A Page 36 - 645100 has been discontinued and is no longer available. Page 40 - The fuel filters on this page should note: "E85 Compatible" Page 41 & 42 - The FLOW EFI intake manifold vacuum/sensor ports should read (3) 1/8"npt and (1) 1/4"npt Page 48 - The 646001 & 646003 Fuel Rails are discontinued and no longer available. Page 68 - 65195A-2 and 65210A-2 should read "Hydraulic Roller Cams up to .625" lift" (not flat tappet) Page 69 & 70 - 69225A and 63240A should read "Hydraulic Roller Cams up to .625" lift" (not flat tappet) Page 73 & 74 - The combustion chamber size on the 90290 & 90290A should read 112cc Page 74 - The guide plates supplied in 90290A & 90315A are now Comp Cams 4811-8. Page 78 - 58185A-2 and 58205A-2 should read "Hydraulic Roller Cams up to .625" lift" (not flat tappet) Page 78 - 60170R has been discontinued and replaced by 58205R. Page 81 - 63171A should not have a reference "See Rockers on Page 88" as the 368160 do not fit with the springs used. Page 114 - 428020 no longer comes with a "Built-in" clamp. Page 116 - 420040 do NOT including reducers as stated. Page 153 - The photos for the steering columns have changed. Please refer to the website for correct photos. Page 175 - PWL2290F has been discontinued and is no longer available. Page 184 - H13-RESISTOR has been discontinued and is no longer available. Page 196 - The 323624 has been discontinued and is no longer available. Page 228 - The combustion chamber size on the 90290 should read 112cc Page 228 - The recommended head studs for 90290, 90315 & 90360 heads should read ARP #235-4713. Page 228 - The recommended guide plates for 90290, 90315 & 90360 heads should read Comp Cams 4811-8.
|